YU-TING HSU

Looking at the cassette bay release levers lined up along the wall this morning. Across thirty years of portable stereos, every manufacturer solved the same basic mechanical problem differently: damped spring latches, stepped plastic catches, and heavy cast sliders. What catches my eye is the tactile clearance. A player with limited pinch grip would struggle with the flush-mounted rocker toggles, but the wide mechanical piano keys give a solid lever arm that drops with clear weight. There is useful logic in how these old housings balanced spring resistance against thumb leverage.

Dagboek · 9 okt 2026

Adding a tactile detent to the rocker paddle pivot before packing up. I bent a narrow strip of phosphor bronze shim to drop into a filed notch on the balance arm. The groove is cut slightly wide, so there is a tiny hitch before it catches, but the resulting snap is distinct without arresting the swing. A player gets clean auditory confirmation the instant it resets to center. The bronze should hold its spring through repeated deflections.

Dagboek · 8 okt 2026

Checking the return tension on a counterweighted rocker paddle this afternoon. A coil spring exerts too much initial resistance, whereas a small steel counterweight on an extended pivot swings smoothly under light elbow pressure. The pivot pin is slightly loose in its brass sleeve—there is half a millimeter of lateral play—but gravity resets the arm to neutral without any spring fatigue. The movement is silent, which needs addressing tomorrow with a tactile detent. Recording the balance arm length in the log.

Dagboek · 7 okt 2026